Pseudo‐R 2’s in the ordinal probit model*

This paper presents an analysis of the combining mechanism for status information postulated by the mathematical formulation of the theory of status characteristics and expectation states. Six lemmas on the basic features of the combining mechanism are derived from the formulation and discussed. Further, four theorems that illustrate the implications of the particular combining mechanism for power and prestige orders are presented and proven.     

Mechanochemical synthesis of PbS/Ni–Cr layered double hydroxide nanocomposite

1. Download : Download high-res image (140KB)
2. Download : Download full-size image

     

The identification of the vibration control system parameters designed for continuous miner machines

The Continuous Miner machines are exposed to time dependent loads during normal operation of the rock cutting process. These loads cause vibrations, which have a negative influence on the whole structure of the machine. This phenomenon can be eliminated by applying passive or active vibration control systems (VCS). Generally these systems are coupled with additional elements, which provide dispersion or transfer energy. The energy thus acquired can also reinforce the intended function such as rock cutting operation in the case of mining machines. The objective of this paper is to present the method of numerical identification of VCS parameters for Continuous Miner machines. The main function of the presented system is to reduce displacement of cutting drum by using elastic element joined to machine chassis and applying appropriate algorithm of control of the angular velocity of cutting drum. The method described improves efficiency of mining and increases durability of machine. In order to determine mechanical and control parameters of VCS the genetic algorithm optimisation method conjugated with numerical modal analysis was used. Finally the transient dynamic analysis was performed for the full-scale model of Continuous Miner in order to verify VCS in normal working condition.     

The effective ionization coefficients and electron drift velocities in gas mixtures of CF3I with N2 and CO2 obtained from Boltzmann equation analysis

The electron swarm parameters including the density-normalized effective ionization coefficients(α-η)/N and the electron drift velocities V e are calculated for a gas mixture of CF3I with N2 and CO2 by solving the Boltzmann equation in the condition of a steady-state Townsend(SST) experiment.The overall density-reduced electric field strength is from 100 Td to 1000 Td(1 Td = 10-17V·cm2),while the CF3I content k in the gas mixture can be varied over the range from 0% to 100%.From the variation of(αη)/N with the CF3I mixture ratio k,the limiting field strength(E/N) lim for each CF3I concentration is derived.It is found that for the mixtures with 70% CF3I,the values of(E/N) lim are essentially the same as that for pure SF 6.Additionally,the global warming potential(GWP) and the liquefaction temperature of the gas mixtures are also taken into account to evaluate the possibility of application in the gas insulation of power equipment.     

金属氧化物对十氯联苯的降解研究

分别以市售的Fe2O3、MgO和CaO为催化剂,对十氯联苯(CB209)进行了催化降解研究.结果表明,MgO对CB209的降解具有较高的活性.在反应温度为300℃,反应时间为60 min时,MgO对CB209的降解效率达到98.9%.进一步研究表明,MgO催化降解CB209的动力学符合准一级动力学反应.通过GC-MS和GC-ECD,并结合衍生化实验,检测到九氯联苯、五氯苯和四氯苯、五氯苯酚、四氯苯酚和三氯苯酚等降解产物,进而推测出MgO催化降解CB209的过程中存在相互竞争的反应路径:氧化反应、碳碳桥键断裂和加氢脱氯.     

Analysis and modeling of radiometric error caused by imaging blur in optical remote sensing systems

Imaging blur changes the digital output values of imaging systems. It leads to radiometric errors when the system is used for measurement. In this paper, we focus on the radiometric error due to imaging blur in remote sensing imaging systems. First, in accordance with the radiometric response calibration of imaging systems, we provide a theoretical analysis on the evaluation standard of radiometric errors caused by imaging blur. Then, we build a radiometric error model for imaging blur based on the natural stochastic fractal characteristics of remote sensing images. Finally, we verify the model by simulations and physical defocus experiments. The simulation results show that the modeling estimation result approaches to the simulation computation. The maximum difference of relative MSE (Mean Squared Error) between simulation computation and modeling estimation can achieve 1.6%. The physical experimental results show that the maximum difference of relative MSE between experimental results and modeling estimation is only 1.29% under experimental conditions. Simulations and experiments demonstrate that the proposed model is correct, which can be used to estimate the radiometric error caused by imaging blur in remote sensing images. This research is of great importance for radiometric measurement system evaluation and application.     

多孔活性自燃金属的光谱辐射特性研究

多孔活性金属材料因为内部存在大量的孔隙，大大地增加了与空气的接触面积，使得其在空气中的燃烧较为猛烈，燃烧温度迅速上升。其燃烧过程属于固体燃烧的范畴，较为复杂。以镁为例，通过建立燃烧模型，来研究多孔活性金属的光谱辐射特性。首先，建立氧气总消耗量与活性金属剩余质量的关系，研究氧气在活性金属孔隙内的扩散浓度关系，通过求解活性金属热平衡方程得到活性金属燃烧过程中温度与时间的关系式，进而得到活性金属的峰值光谱辐射强度表达式；然后，将模型计算的仿真结果与红外热像仪测得的实验结果对比，结果表明，模型的计算结果与实验结果相一致，误差在了10%以内；最后，通过建立的燃烧模型来研究活性金属燃烧规律以及其光谱辐射特性，解决了高空、高速下的活性金属光谱辐射强度难以实验获得的问题，大大减小了实验成本与时间。分别对比不同时间活性金属箔片在1～3，3～5以及8～12 μm波段下的辐射强度，得出活性金属燃烧时的辐射强度主要集中在3～5 μm波段的结论。研究结果表明：自燃金属最大燃烧温度随高度的增加逐渐下降，随气流速度的增加先增加后减小，在速度为30 m·s-1时，温度达到最大；自燃金属的光谱辐射强度在2～6 μm波段达到最大。该模型也可以用来研究其他活性金属的燃烧特性。     

Light intensity and image visualization of GDI injector sprays according to nozzle hole arrangements

The light intensity measurement and image visualization of multi-hole injection spray due to different hole arrangements and hole numbers were investigated. The light intensities and behavior characteristics of the GDI spray were analyzed through the axial and diagonal spray penetration, cone angle, and spray area from the spray images by using the image visualization system and image analysis system. The atomization performance of GDI injectors was analyzed by the local and overall Sauter mean diameter (SMD) measurement.